??

지원되는 타사 쿠키 없음

귀하의 브라우저는 타사 쿠키 설정을 허용하지 않습니다. 브라우저 설정에서 활성화하거나 아래 버튼을 클릭하십시오.

파트커뮤니티가 작동하려면 브라우저에서 쿠키를 활성화하십시오.
카탈로그 탐색
en

LUCAS - INVERTED MOTORIZED LINEAR AXIS - 2 LOADS

  1. LUCAS FRANCE
  3. Motorized linear axis on pillars
  5. Inverted motorized linear axis
CAD모델 선택
사용 가능한 제품: 1
HELP_VARIABLE
Company
LUCAS FRANCE
Description
ALIS - 2 LOADS - INVERTED LINEAR AXIS
Bill of material
LUCAS - INVERTED MOTORIZED LINEAR AXIS - 2 LOADS
Load 1
 kg
Load length 1
 mm
값 입력 LOCHARGE1
Load length 1
mm
cm
inch
ft
Load width 1
 mm
값 입력 LACHARGE1
Load width 1
mm
cm
inch
ft
Center of gravity position of load following Y1
 mm
값 입력 CDGYCHARGE1
Center of gravity position of load following Y1
mm
cm
inch
ft
Center of gravity position of load following Z1
 mm
값 입력 CDGZCHARGE1
Center of gravity position of load following Z1
mm
cm
inch
ft
Load 2
 kg
Load length 2
 mm
값 입력 LOCHARGE2
Load length 2
mm
cm
inch
ft
Load width 2
 mm
값 입력 LACHARGE2
Load width 2
mm
cm
inch
ft
Center of gravity position of load following Y2
 mm
값 입력 CDGYCHARGE2
Center of gravity position of load following Y2
mm
cm
inch
ft
Center of gravity position of load following Z2
 mm
값 입력 CDGZCHARGE2
Center of gravity position of load following Z2
mm
cm
inch
ft
Useful stroke
 mm
값 입력 COURSE
Useful stroke
mm
cm
inch
ft
Max travel speed
 m/s
Acceleration max of carriage
 m/s²
LUCAS Category
Information of robot configuration
The configuration is possible and fits in the standard products of LUCAS FRANCE.
Protection bellow option
Effective stroke
8222.0 mm
Offset of the poles
 mm
값 입력 I
Offset of the poles
mm
cm
inch
ft
End pillar 1 position
Offset of the end pillar 1
 mm
값 입력 I1
Offset of the end pillar 1
mm
cm
inch
ft
End pillar 2 position
Offset of the end pillar 2
 mm
값 입력 I2
Offset of the end pillar 2
mm
cm
inch
ft
Choice of height
Height value
 mm
값 입력 HAUTEUR
Height value
mm
cm
inch
ft
Energy chain width
 mm
Energy chain position
Arrival position of the cables
Precision and repeatability
Precision of racks
+/- 0.566 mm
Unidirectional repeatability without deformation of the structure
+/- 0.050 mm
Bidirectional repeatability without deformation of the structure
+/- 0.194 mm
Straightness of the beam without deformation of the structure
1.00 mm
Stiffness
Carriage 1 position
 mm
값 입력 POSCHARIOT1
Carriage 1 position
mm
cm
inch
ft
Carriage 2 position
 mm
값 입력 POSCHARIOT2
Carriage 2 position
mm
cm
inch
ft
Application field
Type of application
Main environment
Maximum emergency stop deceleration
 m/s²
Motor maximum torque required
21.71 Nm
Maximum motor brake torque
78.57 Nm
Load inertia applied to the motor shaft
614.86 kg.cm²
Required motor speed
2727 tr/min
Carriage housings color
Beam and pillars color
Warranty option
Customer tests at LUCAS
Place of delivery and installation
Distance between LUCAS and the installation site
 km
미리보기
3D
2D
CAD모델 다운로드